# How to make a portable sundial

This easy-to-make instrument, based on a portable 16th-century design, will accurately tell the time.

Skill level: beginner
Image Credit:

A PDF required for this 'How to' is available here.

Warning: do not attempt to look at the Sun via the naked eye or unfiltered optical instruments

Before reliable mechanical clocks were invented at the end of the 17th century, the most accurate means of recording the passing of time was to trace an object’s shadow, cast by the rays of the Sun, on a graduated dial. The first evidence of a sundial is Egyptian, and dates from the 15th century BC.

In the second century AD, Ptolemy’s Analemma described in detail how the circles of the celestial sphere could be projected onto a flat plane using trigonometrical principles. For the sundial maker this treatise was invaluable, since the motion of an object’s shadow – the technical term for the part of the sundial that casts a shadow is a ‘gnomon’ – could now be described with mathematical precision for any orientation of dial wherever it was on Earth. With the invention of magnetic compasses at the end of the 14th century, portable directional sundials finally became a reality.

When most people think of a sundial, they picture a garden, or horizontal, dial mounted on a pedestal. On a correctly positioned example, the gnomon will point due north, and its angle to the horizontal will equal the latitude of its location. If you own an equatorially mounted telescope, you may recognise this setup as the definition of the polar axis – parallel to the rotational axis of the Earth. A variation of this form, the vertical dial, is often found on the south-facing side of churches and buildings.

Sundial selection

There are several other forms a sundial can take. On equatorial dials, the hour scale is a disc that lies at right angles to the gnomon, on the plane of Earth’s equator. This makes it difficult to read around the time of the equinoxes, so an improved version is the armillary sphere. With this form, the hours are inscribed on a ring with the same centre point as the gnomon. Then there are polar dials, on which the hour scale lies parallel to the gnomon.

The form of sundial that we’re going to make is called the diptych. This is a development of the horizontal and vertical sundial that became popular as a portable instrument in the 16th century. Our version has been specially designed for the centre of the UK (latitude 54° N, longitude 2.5° W). It has two dials angled at 90°; a taught thread between their centres forms the gnomon. You’ll be able to tell Greenwich Mean Time with the vertical dial and British Summer Time on the horizontal dial. And what’s more, the shadow from a knot or bead at point C on the gnomon thread will mark the solstices and equinoxes.

This sundial will always display local, or apparent, solar time: whenever the Sun is exactly due south, the apparent time is precisely midday. But unless you live precisely on the Greenwich Meridian, a correction has to be applied due to longitude. This is because sundials show local midday four minutes early for every degree of longitude east of Greenwich, and four minutes late for each degree west of it. At Lowestoft, the most easterly point of the UK, a sundial shows midday seven minutes before London, whereas at Penzance (longitude 5.5° W) a sundial displays noon 22 minutes after Greenwich (see diagram below).

What you'll need to get started

Computer printer - You’ll need a good-quality inkjet or laser printer to reproduce the sundial plan from the coverdisc onto A4 paper. If you don’t own a printer, your local library should be able to help.

Thick card - A rigid piece of A4-sized card is best to mount the printed plan. A cereal packet will do, but make it double thickness.

Glue - Use an aerosol-based contact adhesive – the stuff used by professionals to mount photos – or a glue stick when you’re sticking the paper plan onto the backing card. Liquid PVA glue (or similar) is hard to apply evenly and may stretch or wrinkle the paper.

Craft knife and ruler - There are some intricate cuts and folds needed to complete the sundial model, so use a sharp blade rather than a pair of scissors, and a ruler as a guide.

Thick thread and needle - The gnomon, the bit of the sundial that casts a shadow, is formed by a piece of black thread pulled taught between two points on the model. String will suffice, but make sure it doesn’t stretch under tension.

Sticking tape - You will need clear tape to secure the thread to the sundial.

The equation of time

Longitude aside, if you carefully log the apparent time of a sundial against the mean solar time shown on an accurate clock (ignoring British Summer Time) you will notice that the two still don’t match over the course of a year. There will be periods when the sundial is fast according to your watch, reaching a maximum of 16.4 minutes at the beginning of November. There will also be times when the sundial is slow, by as much as 14.2 minutes in February. This is known as the ‘equation of time’, and it is something Ptolemy devoted a whole chapter to in the Almagest.

It can be expressed as follows:

Equation of time =
apparent solar time – mean solar time

The reason for the discrepancy is down to the eccentricity of the Earth’s orbit, which causes the apparent movement of the Sun along the yearly course of the ecliptic to speed up and slow down, as well as the inclination of the Earth’s orbit to its equator. But there are four times a year when a sundial on the GreenwichMeridian and clocks would agree: 15 April, 13 June, 1 September and 25 December. Contemporary designs which correct for the equation of time, as well as longitude, display clock time very accurately, reconnecting human activity with the ancient cycles of the Sun and stars.

Step 1

Download the file in the link at the top of the article. The diagram is dimensionless, so you can print it at the standard A4 size or enlarge it if you can get hold of some A3 card. Alternatively, you can photocopy it to any scale you like.

Step 2

Make sure that the card you are going to use as the backing is moderately stiff and flat, though the folds you will add in further steps will lend further rigidity. Use your gluestick or aerosol-based spray adhesive (photo mount) to add an even layer of adhesive all the way over the back of the entire plan. Place it smoothly on the card and leave it to dry.

Step 3

With your craft knife and ruler at the ready, and with the plan and card on a suitable work surface, carefully note the latitude lines on both sides of the diagram. Lightly score through both of the lines that correspond to your latitude, before applying more force to cut all the way through. Don’t cut through any other lines at this stage.

Step 4

Cut out the sundial with your craft knife and ruler, carefully following the bold solid outline of the plan. Don’t cut inside this line or along any of the bold dotted lines, which are the fold lines. Once you have carefully cut out the plan, score the fold lines very lightly to help you bend them. Don’t throw anything away at this stage, you’ll need it later.

Step 5

At the top of the plan you will find a line drawn from A to B, with a point C marked about two-thirds of the way from A. Place a knot, a tiny bead or a blob of paint at point C to mark it, and stretch your thread between A to B, using pieces of tape to precisely mark their positions. Apply the thread to the corresponding points on the model.

Step 6

Now that you’ve created your sundial, in order to make it work you need to place its base on a horizontal surface and orientate it correctly with respect to the Sun. This is made much easier by the specially commissioned Sundial Calc program on the coverdisc: this will calculate a correction that wiill take the equation of time and your longitude into account.