Sky-Watcher SynGuider

0
Your rating: None
Magazine Verdict: 
93%
Sky-Watcher SynGuider

Vital Stats

Price: 
£229.00
Weight: 
200G
Supplier: 
Optical Vision Ltd
Telephone: 
01359 244200
Website: 
www.opticalvision.co.uk

The most popular way to accurately track a deep-sky object so that it can be imaged clearly is with an autoguiding system. This is normally a second telescope and camera, mounted on top of the main imaging telescope, that captures images of a guide star. These are monitored by software on a laptop to make sure that the star’s position hasn’t changed. If the position does change, the software sends correction commands to your mount to bring it back into position. As both the imaging camera and guide camera are attached to the same mount, errors are corrected for both cameras, ensuring accurate tracking while imaging. However, the SynGuider is slightly different. It is a stand-alone autoguider, one that doesn’t need a laptop or software to operate; all that’s needed is a second telescope.

We’re looking at one of the first off-the-shelf retail SynGuiders here. It comes well packaged in a sturdy 23x15x9cm box. Inside there’s a reasonably well-written and illustrated A6 manual, the SynGuider itself, a hand control pad, 1.25-inch nosepiece, T-adaptor, an ST4-compatible guide cable, battery case, serial cable, eyepiece extension tube and a parfocal eyepiece ring.

The SynGuider’s stylish, silver-finished aluminium and plastic housing hides a secret – a built-in LCD screen. This screen gives you access to a range of menus that allow you to choose a suitable guide star. You then use the screen to focus on the star, set exposure, calibrate with the mount, adjust the aggressiveness of the telescope control and start autoguiding. Menus are navigated using the buttons on the hand pad. These have a rather soft, rubbery feel and don’t always work on the first press, but the menus are simple to navigate and we soon got used to the feel of the controls.


Get connected

Setting up for an autoguiding session is straightforward and well explained in the manual. After connecting the cables for power, ST4 guiding (linking the SynGuider to the mount) and hand pad, you first have to find a bright star to focus the SynGuider on. You do that using your own eyepiece (we used a standard 25mm Plössl) in the guide scope, carefully centring and focusing the chosen star in the field of view. You then replace the eyepiece with the SynGuider and fine-tune focus on the star on the built-in screen.

With a good focus, the telescope can be slewed to the object you want to image. You now choose a suitable guide star near the centre of the field of view and select ‘lock’ from the menu using the hand pad. Once the SynGuider is successfully locked on the star, ‘auto-calibration’ is selected.

Calibration determines the SynGuider’s orientation and tests the sensitivity of the mount to guiding commands. This ensures that the SynGuider controls the mount correctly in response to any movement of the guide star. Once that has been carried out, the system automatically starts to autoguide and your imaging session can commence.

The autoguiding system works very well, but it isn’t as easy to set up as a more conventional guide camera and PC system. This is because of the need to swap between the eyepiece and the camera, although you soon get into the routine. The position of the screen on the rear of the camera isn’t ideal, especially for objects high in the sky: we had to do quite a lot of crawling around to view it properly. Using a star diagonal would make the system much more comfortable to use, but at the risk of introducing some instability.

The SynGuider is ideal if you use a DSLR from a dark site, since there’s no need for a PC and both imaging and guiding cameras can be completely self-contained. Price has always been an issue with other stand-alone autoguiders – you previously had to spend a similar amount to a PC and a conventional guide camera combined. But the SynGuider changes all that: what we have here is a complete system that costs less than many conventional guide cameras on their own.


Stars on display

The SynGuider is very different from most other autoguiding systems in that it is very much a stand-alone unit. This gives it an immediate advantage over other autoguiders in that you don’t need a PC or guiding software to operate it, so there is less equipment to carry around and set up.

What makes the SynGuider unique is its built-in display screen. This not only gives access to a comprehensive set of options for controlling the camera and the guiding parameters, but it also displays the actual guide stars. 

Once you have chosen a suitable guide star with your own eyepiece and replaced it with the guide camera, the display immediately shows the guide star. It’s a subdued white-on-red display to help maintain your night vision. The screen is divided into two zones, the left half displays the various menus and text data and the right half shows a real-time 1-bit image of the star in the field of view.


This review originally appeared in the September 2010 issue of BBC Sky at Night Magazine.

User Reviews

We use cookies to improve your experience of our website. Cookies perform functions like recognising you each time you visit and delivering advertising messages that are relevant to you. Read more here