Weight: Mount 15.4kg, tripod 7.5kg
Supplier: Optical Vision
Telephone: 01359 244200
Go-To mounts are typically available in one of two formats, equatorial or altazimuth.
Usually, these mounts serve different purposes – altaz mounts are best suited for visual observing, but equatorial mounts can be used for imaging as well.
Sometimes, though, it’s useful to have one mount that can do both.
Manufacturers have clearly taken note of this, because mounts offering both altaz and equatorial modes are becoming ever more common.
Sky-Watcher’s AZ-EQ6 GT mount is the latest entry to this new market.
Based on the successful NEQ6, the AZ-EQ6 GT looks sleek in its white livery.
It’s supplied with a sturdy stainless steel tripod, a second telescope mounting saddle, two 5kg counterweights, counterweight extension rod, power cable, SynScan hand controller and a camera control cable.
The built-in and secondary mounting saddles accept 45mm and 75mm dovetail bars, so they can accommodate both Vixen- and Losmandy-mounted telescope tubes.
In the altaz dual telescope configuration, we were pleased to see how easy it was to attach the second saddle to the counterweight bar.
There are several tweaks that make this mount both interesting and useful.
Firstly, it has dual encoder technology on both axes.
This allows you to select an object from the database, slew to it, then manually move the mount to another area of sky without losing positional information.
We slewed to M27 in Vulpecula using the handset, then manually moved on to M81 across the sky in Ursa Major.
We then used the handset to go back to M27 – for most of our tests it was in the field of view, if not always quite centred.
Accuracy improved when we chose objects closer to each other in the sky.
Another innovation is the way that the mount’s latitude/altitude is adjusted.
This is usually done by turning two altitude bolts either side of the mount, which often aren’t all that easy to adjust. S
ky-Watcher has fitted this mount with a single altitude adjustment bolt that has a tommy bar at the end.
This gives much smoother, finer control over adjustment, and the bar is hinged so it can slide neatly away into the bolt itself – a brilliant upgrade.
This adjustment bar also allows you to set the mount to its altaz configuration, but to avoid strain on the bolt it is always best to remove the counterweights before proceeding.
The RA and dec. clamps have also been redesigned, making them easy to operate even with gloves on.
We came across a minor quirk when polar aligning the mount.
If you power it up and then rotate the dec. axis so that you can view and align Polaris through the polarscope, you also activate the dual encoders.
On successive attempts we found the scope always pointed 90° away from the first alignment star.
We found that it was better to do the polar alignment, turn the power off and line up the scope north, then power back up again.
After doing this we could align every time.
Sky-Watcher AZ-EQ6 GT mount
We tested the Go-To and tracking accuracy in both EQ and altaz modes with our Sky-Watcher SkyMax 180 Maksutov-Cassegrain and a 9mm illuminated reticule eyepiece attached, giving us 300x magnification.
The latter helped us achieve three-star alignment.
Using a 26mm 2-inch eyepiece, we selected several deep-sky objects and stars to check how accurately the mount slewed to each, and can report that the mount placed them consistently near the centre of the field of view.
For our dual telescope tests we added a 3-inch apo with a 26mm eyepiece.
We chose Altair in Aquila to check how well the mount tracks celestial objects: it was able to keep the bright star close to the centre of the view for 45 minutes in both configurations, with only slight drift.
All in all, the mount performed very well and is going to be a hard act to beat.
Find out where to buy your equipment with our Retailer Guide.
This review appeared in the September 2013 issue of BBC Sky at Night Magazine